9 How To Install Drawer Pulls Template

Ditulis Anonim Senin, 05 Mei 2014 Tulis Komentar Edit

Most drawer pulls are centered on the drawer fronts but if the cabinet youre working on has two or three drawers the same size and one larger one at the bottom install the bottom knob or pull higher than the center of that drawer front. But i cant tell you how many times a day i reach for the drawer like it has two pulls on it.

How To Install Cabinet Hardware Using A Template

The hardest part of installing pulls is obtaining proper alignment of the holes.

How to install drawer pulls template. My pantry drawer fronts are all installed now. Installing cabinet and drawer pulls is a simple process of drilling a hole and threading the pull into the hole. I ordered cup hinge drawer pulls which are wider than average so the drawer pull template i have and the ones commonly sold and readily available didnt work.

In order to install them i had to drill all the holes for my hardware. Leah demonstrates how to create a template for installing perfect cabinet door pulls and knobs using a cabinet hardware jiglink to the kreg cabinet hardwar. To create the template.

The drawer on the left with one pull is 28 wide and the drawer on the right with two pulls is 37 inches wide. This configuration is pleasing to the eye and you wont have to bend over as far to open the bottom drawer. Push the bolt through the drawer from the backside.

To do that i had to make a custom drawer pull template. Turn the pull clockwise to tighten it onto the bolt from the face of the drawer. Install it so all the knobs on the cabinet are spaced evenly.

So its a big difference and i like the way it looks with only one pull on the left. Adjust the template measurements to meet your specific needs. Hold the bolt stable with your finger.

The edges of the square you cut will line up with the edges of the cabinet doors. When the knob stops. The pulls anchor using a screw that goes through the back of the pull.

Hi melissa you are very observant. Start by determining where exactly you want your knobs to sit. Cut a small piece of thin wood or even a piece of cardboard or cardstock would work.

How To Install Cabinet Knobs With A Template A Trick For